Open now, 24 hours 5.0 from 148 Google reviews Call 0449 154 812
0449 154 812
Data & Network Cabling in Sydney

Data and network cabling, Sydney

Wi-Fi dropping out upstairs, or a home office running off one old phone point? We run Cat6 data points and ceiling access points. The quote is free and fixed before we start.

  • No call-out fee
  • Fixed price first
  • Every run tested
5.0 from 148 Google reviews, every one five stars

Get a fixed price

Tell us what needs doing. We work out the number before anyone starts.

Or call 0449 154 812, day or night

Licensed & insured Every job done by a licensed electrician
Available 24/7 Including nights and weekends
Lifetime labour warranty On the workmanship, for as long as you own it
Fixed price upfront Agreed before anyone starts work
Australian owned Local crew, working across Sydney

Before you book

What is on at the moment. Mention it when you ring and it goes on the quote.

Every current offer
Electrician's van parked outside a lit brick house at night

$0 to come out and look

No call-out fee, day or night. We look at the job and give you a fixed price before anyone picks up a tool.

Call now
Gloved hand testing a home switchboard with a meter probe

15% off your first booking

First time using us? Your first job comes off 15%, whatever it is.

Get a price
An older couple on their front porch talking with a tradesperson

15% off for seniors, every job

If you hold a seniors or pensioner card, mention it when you book and the discount goes straight onto the quote.

Call to book

Why home and office networks let you down

The NBN plan often wears the blame for cabling and a badly placed router.

  • Router stuck beside the NBN box

    The NBN box often went in the garage or front room. The rooms that need Wi-Fi most end up furthest away.

  • Brick, concrete and a second storey

    Double brick, concrete and an upstairs floor soak up Wi-Fi. One router rarely covers a large or two-storey home properly.

  • Mesh units talking over Wi-Fi

    Mesh units that pass data wirelessly lose speed at every hop. Cabling each one back to the router solves most of that.

  • Old phone cabling

    Older phone wiring is often Cat3 or runs socket to socket. It was never made for gigabit and is not worth reusing.

  • Bad terminations and cheap cable

    Copper-clad aluminium cable and sloppy punch-downs cause slow links and dropouts that are hard to find without testing.

  • Gaps in outdoor conduit

    Badly joined or unsealed conduit outside lets water into the wall cavity, where it damages the cable and whatever else is there.

Wi-Fi playing up and not sure why? Ring us0449 154 812

Data and network cabling we do

Most homes need a few of these together, and offices usually need the lot.

Every service we offer
Cat6 and Cat6A data points

Cat6 and Cat6A data points

Wall points where the desk and TV sit, cabled to one spot. Cat6 suits most homes. Cat6A adds headroom for 10 gigabit.

NBN box cabling and relocation

NBN box cabling and relocation

We cable from the NBN box to where the router goes. NBN Co owns the box, so moving it follows their rules.

Racks and patch panels

Racks and patch panels

Runs end at a patch panel in a small wall rack, with the modem and switch. Each is labelled at both ends.

Wi-Fi access points

Wi-Fi access points

Ceiling access points run off one cable from the rack for power and data. They reach upstairs dead zones one router cannot.

Small office and shop cabling

Small office and shop cabling

Desk, printer and phone points cabled to a rack with room to grow. The power can go in on the same visit.

Fixing and re-running bad cabling

Fixing and re-running bad cabling

We trace dead or slow points and re-terminate or replace faulty runs. Leaking conduit gets redone, and every point is tested.

How we cable a home or office network

Good cabling is mostly deciding where everything ends up before the first cable is pulled.

  1. Plan the points and the hub

    We mark every data and access point, then choose a rack spot, usually by the NBN box or in a cupboard with power.

  2. Choose the cable

    Most homes get Cat6. Cat6A goes in for long runs, 10 gigabit plans or lots of powered cameras and access points on one switch.

  3. Run it clear of power

    Cable goes through the roof and wall cavities, kept apart from power as the cabling rules require. Outside sections get sealed conduit.

  4. Terminate and label

    Each run is terminated at a wall plate and the patch panel, and labelled at both ends for whoever traces it later.

  5. Test every run

    Every run is tested end to end for continuity and correct wiring. Faults get fixed before furniture goes in front of the plate.

  6. Connect and hand over

    The modem, switch and access points get patched in and each point checked. Then we show you what goes where.

Work we have finished recently

Photographs of jobs we finished and handed back. Our own work, not stock.

  • Upgraded meter panel with a new breaker enclosure, terminations marked up in chalk pen Switchboard and metering upgradeour work
  • Open pit with orange conduit and cable marker tape during an underground mains run Underground consumer mainsour work
  • Dual meter switchboard fitted with a new breaker enclosure Dual meter upgradeour work
  • Heat pump hot water unit wired in on a brick wall with its isolator fitted Hot water connectionour work
  • Meter box interior with a new breaker panel, meter and tagged service fuses Switchboard rebuildour work
  • Twin meters set into a brick wall recess above a new breaker enclosure Twin metering upgradeour work
Technician checking a newly installed data point with a cable tester

What happens when you call us about data and network cabling

From the first phone call to the final test, this is how it runs.

  1. A person answers the phone

    Day or night. Tell us what is happening. If it sounds dangerous, we tell you what to switch off while we get moving.

  2. We book a time that works

    Urgent faults go to the next available electrician. Planned work gets a set day so you are not waiting around.

  3. A licensed electrician comes out and looks

    We work out what is actually wrong on site rather than guessing over the phone. The visit costs you nothing.

  4. You get one fixed price

    Written down and explained before anyone starts. Nothing happens until you say yes.

  5. The work gets done properly

    Done to the Wiring Rules with the right parts. Dust sheets go down wherever we are working.

  6. We test it and show you

    Every circuit we touch is tested before we leave. Where the law requires a compliance certificate, you get one.

  7. You pay the price you agreed

    The quote is the invoice. Our labour stays guaranteed for as long as you own the property.

Step one is a phone call0449 154 812

What we promise on every job

You can hold us to these on every job.

No call-out fee

Coming out to look costs nothing, day or night, whether you go ahead or not.

One fixed price

Agreed before work starts. The quote is the invoice.

Nothing extra without asking

If something unforeseen turns up, we stop and talk to you first.

Labour guaranteed

If our workmanship fails, we come back and fix it, for as long as you own the property.

Our labour guarantee is extra to your rights under Australian Consumer Law and the NSW Home Building Act.

Signs your home or office needs data cabling

Most of these are frustrations rather than emergencies, except the first one.

  • Water near a power or data point Ring now

    Keep clear, turn that area off at the switchboard if safe, and ring us now.

  • Video calls freeze in the home office

    Usually weak Wi-Fi at that end of the house. A wired desk point fixes it.

  • Dead zones upstairs or out the back

    The router cannot reach that far, so put a cabled access point there.

  • Fast NBN plan, slow speeds in most rooms

    Often the bottleneck is inside the house, not the NBN connection.

  • The NBN box is in the wrong room

    Everything starts at the box. Either run cable from it or have it moved.

  • Mesh units keep dropping out

    They are probably linking over Wi-Fi. Cabling them back to the router helps a lot.

  • A data point has stopped working

    Usually a damaged cable or bad termination, which testing can find.

  • A tangle of cables in the cupboard

    Nobody knows what goes where until a labelled patch panel sorts it out.

Water in a wall near power or cabling means ring us now, day or night. Book the rest whenever.

Ticked one of these?0449 154 812

Data cabling for homes and businesses

Homes want every room covered, while businesses want a network that copes all day and can grow.

Homes, home offices and renovations

Most homes want a wired desk and TV, plus access points on every floor. Renovations and new builds are the easiest time, while walls are open.

  • Office and TV points
  • Ceiling Wi-Fi access points
  • NBN cabling and racks

Small offices, shops and clinics

Offices need a network that holds up all day and a rack with room to grow. Doing power and data in one visit saves booking two trades.

  • Desk and printer points
  • Racks and patch panels
  • Camera and Wi-Fi cabling

Data and network cabling near you

We take data and network cabling right across Sydney, up the Central Coast and into the Blue Mountains. Open your area to find your suburb.

All 476 suburbs
Inner west and city fringe Federation houses and terraces, a lot of them still on original wiring.
Eastern suburbs Older unit blocks and big renovation budgets, often in the same street.
Lower north shore and northern beaches Period homes, strata buildings and salt air that is hard on outdoor fittings.
Upper north shore Large older homes where the switchboard has usually been patched, not replaced.
Parramatta, Ryde and the central west Dense and mixed, from post war cottages to new apartment towers.
South west Close to home for us. Brick veneer homes and a lot of new estates.
St George and the Sutherland Shire Post war brick homes, many still running ageing boards.
The Hills and western Sydney Growth corridors, new builds and plenty of renovation work.
Central Coast Coastal homes where salt and storms take a toll on wiring and fittings.
Blue Mountains Storm damage, older cottages and cold snaps that find weak circuits.

What people say about our data work

Matched to this kind of work where customers mention it, straight from our Google listing.

5.0
148 reviews on Google
  • Jahfar named in 25
  • Jay named in 18
  • Katrina Lamborne 3 years ago
    Just wanted to reach out and thank you so much for the work you did for us. We used another electrician to do some data cabling in our house which ended up being a terrible...
  • Rajesh Rajan 3 years ago
    If you’re looking for electrical and data services around leppington, do hit up Jahfar from Aus Electrical and Data Services. I used his services for a wiring issue with my...
  • Tyrone Curtis 3 years ago
    If you’re looking for electrical and data services around leppington, do hit up Jahfar from Aus Electrical and Data Services. I used his services for a wiring issue with my...
  • Arwyn Edited 4 months ago
    Jay is absolutely amazing!!! When I decided to install solar I was told I needed to upgrade my switchboard because of safety issue, then turned out I also needed to update...
  • Jeiazel Soriano 3 years ago
    I have recently called Aus Electrical & Data Services to get a quote for downlights around my house, sensor lights on the side and entry area. Jahfar is very responsive as I...
  • Johnson Vu 5 years ago
    Jahfar and his team are second to none. It is shown through his services that i recently used that he is capable of handling absolute quality work of a professional...
  • Iconic Carpet Cleaning 5 years ago
    I used J and his team to upgrade my parents panel. He was honest and upfront about costing. We spoke about doing some outdoor lighting for the backyard at my place, I spoke...
  • Anna 5 days ago
    Outstanding and professional electricians with fair pricing. They arrived on time and even though there was an issue with road closures in my area at the time that I was...
  • James Raju 11 months ago
    I had an excellent experience with Aus Electrical and Data Services. From start to finish, the service was outstanding. He was extremely professional, arrived right on time...
  • Ray “Ray V.” 3 months ago
    It was great to have Jay and his team completing my list of complex tasks. They arrived on time and kept me informed as they progressed. There approach was professional and...
  • 이윤규 6 months ago
    My wife & I was looking for an electrician & we googled it and found Aus Electrical and Data Services. We contacted them as they have great reviews and we know why! Jay was...
  • Katalina Eid 5 years ago
    Not only was the outcome of his job perfect but so was his exceptional service. We were beyond satisfied with his efforts and professionalism in which he paid attention to...
  • Sim Peterson a month ago
    If you’re looking for someone local and honest you can’t go past Jay from Aus Electrical and Data. Jay did a switchboard upgrade and fixed an earthing issue for us and it was...
  • DurrDurr 2 months ago
    Recently had some electrical work done at my property. Jahfar and his team went above and beyond to make sure works were done on time and to an exceptional standard. Safety...
  • Dana 2 years ago
    I recently had the pleasure of working with Jahfar and I can't recommend him highly enough. He was incredibly efficient and professional throughout the entire process. He...
  • Yousef Nadde 5 years ago
    Fantastic work by Jahfar and his team! I called for a few light replacement and upgrade on some existing PowerPoint and switches with additional fan installations. They...

Finding an electrician in Sydney who turns up

The hardest part of getting electrical work done in Sydney is not the work. It is finding someone who shows up when they said they would, tells you the price before they start, and does not leave you chasing them for a certificate afterwards.

Sydney is inside our normal run, as are Sydenham, Sydney, Sydney Olympic Park. We quote the whole job as one number before we start, and we do not charge to come and look at it.

What makes Sydney different to work in

Sydney has the mix you find across a lot of Sydney: older homes still running the board they were built with, sitting next to places that have been renovated two or three times. Both throw up their own problems, and both are jobs we do every week.

If your place in Sydney still has ceramic fuses or a board with no safety switch, that is the first thing worth sorting. It is also the thing insurers ask about most.

What usually causes it around Sydney

Age is the biggest single factor. Wiring installed decades ago was sized for a very different household, and insulation on older cable gets brittle and cracks, particularly in roof spaces that heat up through summer.

Water gets in more often than people expect. A roof leak above a light fitting, condensation in an outdoor outlet, or a subfloor that stays damp will all eventually cause tripping.

What data & network cabling costs in Sydney

There is no honest way to put a single figure on this page, because the price depends on what is behind your wall. Anyone quoting you a firm number over the phone without seeing the job is guessing, and the gap between the guess and the invoice is usually yours to pay.

What we can promise is the shape of it. We come out and look for nothing, we work out what the job actually needs, and we give you one fixed number for the whole thing. If we find something unexpected once we are into it, we stop and talk to you rather than adding it to the bill. The number you agreed is the number on the invoice.

How we work compared to an hourly rate

Plenty of electricians around Sydney charge by the hour. It sounds cheaper and often is not, because you are carrying all the risk. If the job takes longer than expected, that is your problem. If someone is slow, that is also your problem.

We price the job, not the time. That means we carry the risk of it taking longer, which is a good incentive for us to turn up prepared. It also means you can say yes or no with the full number in front of you.

What you can safely do yourself

Almost nothing, and that is not us protecting our own work. In New South Wales it is against the law for an unlicensed person to do fixed electrical wiring, and the insurance consequences of a fire traced back to unlicensed work are severe. Replacing a plug top on an appliance or changing a lamp is fine. Anything behind the wall or inside the board is not.

Before you call, switch off the appliance you suspect and see whether the problem goes away. If the board holds with that one thing unplugged, you have found it, and the visit gets much shorter.

Renting in Sydney, or managing a building?

If you rent, electrical repairs to the property itself are the owner's responsibility, and urgent electrical faults fall under urgent repairs in New South Wales. Talk to your agent first. If it is genuinely dangerous, say so clearly, because that changes how quickly it has to be dealt with.

If you manage a strata block around Sydney, we can work on common property and bill the body corporate directly, and we can keep the same electrician on your building so nobody is relearning the site every visit.

Questions about data and network cabling

The ones we get asked most. If yours is not here, ring and ask.

Question not on the list?0449 154 812

Get a fixed price for data and network cabling

Send the job through and we come back with one price for the whole job. If it is urgent, ring instead. The phone is answered day and night.

Get a fixed price

Your name, number and the job. We come back with one price.

Or call 0449 154 812, day or night

Call now Get a price