Open now, 24 hours 5.0 from 148 Google reviews Call 0449 154 812
0449 154 812
Smoke Alarms in Sydney

Smoke alarms in Sydney

Alarm chirping at 3am, or a rental due for its yearly check? We fit and replace alarms to NSW rules at a fixed price. Every booking gets a free alarm assessment.

  • Free alarm check
  • No call-out fee
  • Answered 24/7
5.0 from 148 Google reviews, every one five stars

Get a fixed price

Tell us what needs doing. We work out the number before anyone starts.

Or call 0449 154 812, day or night

Licensed & insured Every job done by a licensed electrician
Available 24/7 Including nights and weekends
Lifetime labour warranty On the workmanship, for as long as you own it
Fixed price upfront Agreed before anyone starts work
Australian owned Local crew, working across Sydney

Before you book

What is on at the moment. Mention it when you ring and it goes on the quote.

Every current offer
White smoke alarm on a hallway ceiling

Free smoke alarm check with any job

Book any job and we test your smoke alarms while we are there, and tell you straight if they meet the NSW rules.

Smoke alarm rules
An older couple on their front porch talking with a tradesperson

15% off for seniors, every job

If you hold a seniors or pensioner card, mention it when you book and the discount goes straight onto the quote.

Call to book
Electrician's van parked outside a lit brick house at night

$0 to come out and look

No call-out fee, day or night. We look at the job and give you a fixed price before anyone picks up a tool.

Call now

Why smoke alarms stop doing their job

These are the usual reasons an alarm on the ceiling stops working.

  • Past the 10 year mark

    Sensors lose sensitivity with age, so Fire and Rescue NSW says to replace alarms at least every 10 years.

  • Dust and insects in the chamber

    Renovation dust and small bugs get into the sensing chamber and set off random alarms in the middle of the night.

  • Fitted in the wrong spot

    Put it near the kitchen, bathroom or an air con outlet and it reacts to toast and steam, or misses the smoke.

  • An older ionisation alarm

    Ionisation alarms are slower to pick up smouldering fires, the common kind in homes. Fire and Rescue NSW recommends photoelectric.

  • The hardwired circuit or backup has failed

    On a hardwired alarm, no green light means lost mains power, often a tripped circuit. The backup battery won't last.

  • Painted over during a renovation

    Ceiling paint over the vents can stop smoke getting in at all. It looks fine but may not detect anything.

Alarm chirping or going off for no reason? Ring us0449 154 812

Types of smoke alarm work we do

We can fit to the NSW legal minimum or to the fuller Fire and Rescue NSW recommendation.

Every service we offer
Hardwired 240V alarms

Hardwired 240V alarms

Mains powered photoelectric alarms with a backup battery, so nobody has to remember batteries. New homes and major renovations need them.

Interconnected alarms

Interconnected alarms

Linked by cable or wireless, so smoke at one alarm sets off the rest. Useful in two storey homes and long layouts.

10 year sealed lithium alarms

10 year sealed lithium alarms

The sealed battery lasts the life of the alarm. It suits places where running cable through the ceiling isn't practical.

Replacing expired alarms

Replacing expired alarms

We swap expired alarms for new photoelectric ones, with a matching base where possible so the ceiling doesn't need fresh holes.

Rental property checks

Rental property checks

Every alarm gets tested and its date checked. Removable batteries are changed and anything failed or expired is replaced.

How we fit smoke alarms

Getting the position right matters as much as the alarm itself.

  1. Walk every level

    We go through every storey, note where the bedrooms are, and check the age and type of your current alarms.

  2. Plan the positions

    Alarms go in the hallway outside bedrooms and on every level, clear of corners and steam, following NSW rules and the maker's instructions.

  3. Agree one fixed price

    You get one price for the alarms and wiring before we start. Going beyond the legal minimum is your call.

  4. Install and interconnect

    Hardwired alarms are cabled to a circuit on your board, then interconnected by cable or wireless module if the job includes it.

  5. Test every alarm

    Every alarm gets tested, including a check that one sets off the rest. Then we show you how to test and hush them.

  6. Certify the wiring

    Hardwired alarm work is electrical work, so we lodge a CCEW with Building Commission NSW and give you a copy.

Work we have finished recently

Photographs of jobs we finished and handed back. Our own work, not stock.

  • Upgraded meter panel with a new breaker enclosure, terminations marked up in chalk pen Switchboard and metering upgradeour work
  • Open pit with orange conduit and cable marker tape during an underground mains run Underground consumer mainsour work
  • Dual meter switchboard fitted with a new breaker enclosure Dual meter upgradeour work
  • Heat pump hot water unit wired in on a brick wall with its isolator fitted Hot water connectionour work
  • Meter box interior with a new breaker panel, meter and tagged service fuses Switchboard rebuildour work
  • Twin meters set into a brick wall recess above a new breaker enclosure Twin metering upgradeour work
Technician checking a newly installed data point with a cable tester

What happens when you call us about smoke alarm work

From the first phone call to the final test, this is how it runs.

  1. A person answers the phone

    Day or night. Tell us what is happening. If it sounds dangerous, we tell you what to switch off while we get moving.

  2. We book a time that works

    Urgent faults go to the next available electrician. Planned work gets a set day so you are not waiting around.

  3. A licensed electrician comes out and looks

    We work out what is actually wrong on site rather than guessing over the phone. The visit costs you nothing.

  4. You get one fixed price

    Written down and explained before anyone starts. Nothing happens until you say yes.

  5. The work gets done properly

    Done to the Wiring Rules with the right parts. Dust sheets go down wherever we are working.

  6. We test it and show you

    Every circuit we touch is tested before we leave. Where the law requires a compliance certificate, you get one.

  7. You pay the price you agreed

    The quote is the invoice. Our labour stays guaranteed for as long as you own the property.

Step one is a phone call0449 154 812

What we promise on every job

You can hold us to these on every job.

No call-out fee

Coming out to look costs nothing, day or night, whether you go ahead or not.

One fixed price

Agreed before work starts. The quote is the invoice.

Nothing extra without asking

If something unforeseen turns up, we stop and talk to you first.

Labour guaranteed

If our workmanship fails, we come back and fix it, for as long as you own the property.

Our labour guarantee is extra to your rights under Australian Consumer Law and the NSW Home Building Act.

Signs your smoke alarms need attention

If any of these sound familiar, the alarm is telling you something.

  • It chirps every minute or so

    Most likely a low battery, or a flat backup battery on a hardwired alarm.

  • The date is over 10 years old, or missing

    Time to replace it, even if the test button still beeps.

  • It goes off every time you cook

    The position is usually the problem. Move or change the alarm instead of pulling the battery.

  • The green light on a hardwired alarm is off

    It has lost mains power, so check the board for a tripped circuit first.

  • The plastic has gone yellow

    Yellowing usually means an old alarm, so check the date and plan a replacement.

  • There is no alarm on one level

    NSW law requires at least one working alarm on every level.

  • You can't hear the upstairs alarm from bed

    Interconnected alarms all sound together, wherever the smoke starts.

  • It's going off and something smells hot Ring now

    If there's smoke, get out and call 000. Otherwise switch off the main and ring us.

Any real smoke is a 000 call first. For everything else, one of these is enough to book a check.

Ticked one of these?0449 154 812

Smoke alarms for homes, rentals and strata

The legal minimum is the same in every home, but who is responsible for it changes.

Owner occupied homes

Owners need a working alarm on every level, and interconnected photoelectric alarms go further.

  • Hardwired or sealed lithium
  • Interconnected on every level
  • Expired alarms replaced

Landlords, agents and strata

Landlords have yearly duties under NSW tenancy rules. Building fire panels are a fire services job.

  • Yearly rental checks
  • Hardwired alarm repairs
  • Alarms inside strata units

Smoke alarm work near you

We take smoke alarm work right across Sydney, up the Central Coast and into the Blue Mountains. Open your area to find your suburb.

All 476 suburbs
Inner west and city fringe Federation houses and terraces, a lot of them still on original wiring.
Eastern suburbs Older unit blocks and big renovation budgets, often in the same street.
Lower north shore and northern beaches Period homes, strata buildings and salt air that is hard on outdoor fittings.
Upper north shore Large older homes where the switchboard has usually been patched, not replaced.
Parramatta, Ryde and the central west Dense and mixed, from post war cottages to new apartment towers.
South west Close to home for us. Brick veneer homes and a lot of new estates.
St George and the Sutherland Shire Post war brick homes, many still running ageing boards.
The Hills and western Sydney Growth corridors, new builds and plenty of renovation work.
Central Coast Coastal homes where salt and storms take a toll on wiring and fittings.
Blue Mountains Storm damage, older cottages and cold snaps that find weak circuits.

What people say about our compliance work

Matched to this kind of work where customers mention it, straight from our Google listing.

5.0
148 reviews on Google
  • Jahfar named in 25
  • Jay named in 18
  • Farhan Khan 4 days ago
    We had an issue with our smoke alarm detectors on a Sunday, and the team at Aus Electrical and Data Services were able to send out Jahfar to investigate the issue within 30...
  • Daniel McCarron 3 years ago
    Aus Electrical and Data Services performed quality electrical work in upgrading an old electricity box ceramic fuses to RCD protection. In addition, hardwired smoke detectors...
  • Arwyn Edited 4 months ago
    Jay is absolutely amazing!!! When I decided to install solar I was told I needed to upgrade my switchboard because of safety issue, then turned out I also needed to update...
  • Katrina Lamborne 3 years ago
    Just wanted to reach out and thank you so much for the work you did for us. We used another electrician to do some data cabling in our house which ended up being a terrible...
  • Jeiazel Soriano 3 years ago
    I have recently called Aus Electrical & Data Services to get a quote for downlights around my house, sensor lights on the side and entry area. Jahfar is very responsive as I...
  • Johnson Vu 5 years ago
    Jahfar and his team are second to none. It is shown through his services that i recently used that he is capable of handling absolute quality work of a professional...
  • Iconic Carpet Cleaning 5 years ago
    I used J and his team to upgrade my parents panel. He was honest and upfront about costing. We spoke about doing some outdoor lighting for the backyard at my place, I spoke...
  • Anna 5 days ago
    Outstanding and professional electricians with fair pricing. They arrived on time and even though there was an issue with road closures in my area at the time that I was...
  • James Raju 11 months ago
    I had an excellent experience with Aus Electrical and Data Services. From start to finish, the service was outstanding. He was extremely professional, arrived right on time...
  • Ray “Ray V.” 3 months ago
    It was great to have Jay and his team completing my list of complex tasks. They arrived on time and kept me informed as they progressed. There approach was professional and...
  • 이윤규 6 months ago
    My wife & I was looking for an electrician & we googled it and found Aus Electrical and Data Services. We contacted them as they have great reviews and we know why! Jay was...
  • Katalina Eid 5 years ago
    Not only was the outcome of his job perfect but so was his exceptional service. We were beyond satisfied with his efforts and professionalism in which he paid attention to...
  • Sim Peterson a month ago
    If you’re looking for someone local and honest you can’t go past Jay from Aus Electrical and Data. Jay did a switchboard upgrade and fixed an earthing issue for us and it was...
  • DurrDurr 2 months ago
    Recently had some electrical work done at my property. Jahfar and his team went above and beyond to make sure works were done on time and to an exceptional standard. Safety...
  • Dana 2 years ago
    I recently had the pleasure of working with Jahfar and I can't recommend him highly enough. He was incredibly efficient and professional throughout the entire process. He...
  • Yousef Nadde 5 years ago
    Fantastic work by Jahfar and his team! I called for a few light replacement and upgrade on some existing PowerPoint and switches with additional fan installations. They...

Finding an electrician in Sydney who turns up

Booking an electrician in Sydney usually starts badly. Something has tripped, something smells hot, or a job you thought was small has turned into a bigger one. What you want at that point is a straight answer about what it will take and what it will cost, not a rate per hour and a shrug.

We cover Sydney along with Sydenham, Sydney, Sydney Olympic Park and the rest of Sydney. You get a fixed price up front, there is no call out fee, and our labour carries a lifetime guarantee.

What makes Sydney different to work in

Sydney has the mix you find across a lot of Sydney: older homes still running the board they were built with, sitting next to places that have been renovated two or three times. Both throw up their own problems, and both are jobs we do every week.

Renovating in Sydney is usually when the wiring gets looked at properly for the first time in decades. Better to know before the walls close up.

What usually causes it around Sydney

Most of what we find comes down to load. The house is doing far more electrically than it was built to do, and the weakest joint in the chain is where it shows up first.

Rodents are a genuine cause and an unglamorous one. Possums and rats in the roof chew cable insulation, and the fault that follows can be intermittent and hard to trace.

What smoke alarms costs in Sydney

We do not publish a price for this, and you should be careful of anyone who does. Two houses in Sydney on the same street can need very different work depending on the age of the wiring and what has been added to it over the years.

What we can promise is the shape of it. We come out and look for nothing, we work out what the job actually needs, and we give you one fixed number for the whole thing. If we find something unexpected once we are into it, we stop and talk to you rather than adding it to the bill. The number you agreed is the number on the invoice.

How we work compared to an hourly rate

An hourly rate puts the risk on you. Every delay, every trip back to the van, every part that turns out to be the wrong one lands on your invoice. That is the opposite of what most people in Sydney actually want, which is to know the number before they say yes.

We price the job, not the time. That means we carry the risk of it taking longer, which is a good incentive for us to turn up prepared. It also means you can say yes or no with the full number in front of you.

What you can safely do yourself

Almost nothing, and that is not us protecting our own work. In New South Wales it is against the law for an unlicensed person to do fixed electrical wiring, and the insurance consequences of a fire traced back to unlicensed work are severe. Replacing a plug top on an appliance or changing a lamp is fine. Anything behind the wall or inside the board is not.

What you can usefully do is narrow it down before you ring. Note which circuit trips, whether it trips straight away or after something specific gets switched on, and whether it started after a storm or a new appliance. That saves time on site.

Renting in Sydney, or managing a building?

If you rent, electrical repairs to the property itself are the owner's responsibility, and urgent electrical faults fall under urgent repairs in New South Wales. Talk to your agent first. If it is genuinely dangerous, say so clearly, because that changes how quickly it has to be dealt with.

If you manage a strata block around Sydney, we can work on common property and bill the body corporate directly, and we can keep the same electrician on your building so nobody is relearning the site every visit.

Questions about smoke alarm work

The ones we get asked most. If yours is not here, ring and ask.

Question not on the list?0449 154 812

Get a fixed price for smoke alarm work

Send the job through and we come back with one price for the whole job. If it is urgent, ring instead. The phone is answered day and night.

Get a fixed price

Your name, number and the job. We come back with one price.

Or call 0449 154 812, day or night

Call now Get a price