The hardest part of getting electrical work done in Pyrmont is not the work. It is finding someone who shows up when they said they would, tells you the price before they start, and does not leave you chasing them for a certificate afterwards.
Pyrmont is inside our normal run, as are Glebe, Ultimo, Balmain East. We quote the whole job as one number before we start, and we do not charge to come and look at it.
Pyrmont has the mix you find across a lot of Sydney: older homes still running the board they were built with, sitting next to places that have been renovated two or three times. Both throw up their own problems, and both are jobs we do every week.
Older wiring around Pyrmont was never designed for the load a modern kitchen puts on it. Add an induction cooktop or a second fridge and the weak point shows up quickly.
A renovation is the only time the walls are open, which makes it the cheapest moment in the life of a house to fix its wiring. Doing it later means cutting into finished plaster and paying twice.
The common mistake is designing the layout around where the outlets already are. Work out where furniture, benches and appliances will actually go first, then place the outlets. It costs almost nothing extra at rough in stage and everything later.
If the house around Pyrmont still has its original board or any cloth insulated wiring, a renovation is the point to deal with it. Adding a new kitchen to sixty year old wiring just moves the problem.
Most of what we find comes down to load. The house is doing far more electrically than it was built to do, and the weakest joint in the chain is where it shows up first.
Water gets in more often than people expect. A roof leak above a light fitting, condensation in an outdoor outlet, or a subfloor that stays damp will all eventually cause tripping.
We do not publish a price for this, and you should be careful of anyone who does. Two houses in Pyrmont on the same street can need very different work depending on the age of the wiring and what has been added to it over the years.
What we can promise is the shape of it. We come out and look for nothing, we work out what the job actually needs, and we give you one fixed number for the whole thing. If we find something unexpected once we are into it, we stop and talk to you rather than adding it to the bill. The number you agreed is the number on the invoice.
The usual model in this trade is a call out fee plus an hourly rate plus parts. You find out the total when it is finished. We think that is backwards, so we quote the job instead of the clock.
We price the job, not the time. That means we carry the risk of it taking longer, which is a good incentive for us to turn up prepared. It also means you can say yes or no with the full number in front of you.
Almost nothing, and that is not us protecting our own work. In New South Wales it is against the law for an unlicensed person to do fixed electrical wiring, and the insurance consequences of a fire traced back to unlicensed work are severe. Replacing a plug top on an appliance or changing a lamp is fine. Anything behind the wall or inside the board is not.
Before you call, switch off the appliance you suspect and see whether the problem goes away. If the board holds with that one thing unplugged, you have found it, and the visit gets much shorter.
If you rent, electrical repairs to the property itself are the owner's responsibility, and urgent electrical faults fall under urgent repairs in New South Wales. Talk to your agent first. If it is genuinely dangerous, say so clearly, because that changes how quickly it has to be dealt with.
If you manage a strata block around Pyrmont, we can work on common property and bill the body corporate directly, and we can keep the same electrician on your building so nobody is relearning the site every visit.